ISSN: Print -0000-0000
Online - 0000 – 0000

Instructions

Journal of Dentistry, Medicine and Surgery is an open access, peer-reviewed, and indexed journal. The journal covers all aspects of dental and medical sciences. Articles reporting clinical observations, experimental studies and theoretical concepts are all welcome, and specially welcomes high-quality review articles from distinguished authors, and original articles reporting new findings in dental and medical sciences.

Abbreviation of Journal of Dentistry, Medicine and Surgery is JDMS. Manuscripts accepted for publication in the journal may be edited to improve clarity.

The Editorial Process

A manuscript will be reviewed for possible publication with the understanding that it is being submitted to Journal of Dentistry, Medicine and Surgery only, and has not been published anywhere, simultaneously submitted, or already accepted for publication elsewhere (except in the form of an abstract or as part of a published lecture or academic thesis). The journal expects that authors would authorize one of them to correspond with the journal for all matters related to the manuscript. All manuscripts received are duly acknowledged. On submission, editors review all submitted manuscripts initially for suitability for formal review. Manuscripts with insufficient originality, serious scientific or technical flaws, or lack of a significant message are rejected before proceeding for formal peer-review. Manuscripts that are unlikely to be of interest to the Journal of Dentistry, Medicine and Surgery readers are also liable to be rejected at this stage.

Manuscripts that are found suitable for publication in Journal of Dentistry, Medicine and Surgery  are sent to expert reviewers. During submission, the author is requested to provide names, affiliations and Emails of qualified reviewers who have had experience in the subject of the submitted manuscript. The reviewers should not be affiliated with the same institutes as the author(s). The journal follows a double-blind review process, wherein the reviewers and authors are unaware of each other’s identity. The comments and suggestions made from reviewers are conveyed to the corresponding author. The author is requested to provide a point by point response to reviewers’ comments and submit a revised version of the manuscript. This process is repeated till reviewers and editors are satisfied with the manuscript.

Manuscripts accepted for publication are copy edited for grammar, punctuation, print style, and format. Page proofs are sent to the corresponding author. The corresponding author is expected to return the corrected proofs within 72 hours. It may not be possible to incorporate corrections received after that period. The whole process of submission of the manuscript to final decision and sending/receiving proofs as well is completed online.

Article Publishing Charges

All articles published in Journal of Dentistry, Medicine and Surgery are fully open access, freely download, and available to read in every part of the world. To help cover the cost of publishing, the journal charges a nominal fee.

Amount payable by Indian authors is INR 3000 (up to 3 authors) and INR 500 extra per author (for more than 3 authors). Amount payable by foreign authors is US$ 175.

One hard copy of the journal will be provided to the corresponding author. For extra hard copies the Indian author(s) will have to pay INR 1000 per copy and foreign author(s) will have to pay US$ 50 per copy.

In normal publication the online version of the article will be published within 4 months of acceptance. In the case of ‘fast track’ publication the article is published as online first within 10 days of acceptance. In this case, a fee of INR 5000 extra from Indian authors and US$ 100 would be charged from foreign authors.

The amount of fee is not able to reflect the true cost of the services provided, it is just for developing and maintaining electronic tools for online publication, and enabling electronic citation in other journals.

The article publishing fee is charged only after Journal of Dentistry, Medicine and Surgery  accepts the article for publication. The submitting author is responsible for the fee payment. Accepted articles will not be published until payment has been received.

Article Publishing Charge waivers or discounts are granted to authors on a case-by-case basis. To apply for a waiver or discount, please request during the submission process.

Please note that Commentary Articles and invited papers will not be subject to an Article Publication Charge.

TYPES OF MANUSCRIPT

Journal of Dentistry, Medicine and Surgery accepts Original Articles, Research Letters, Review Articles, Technical Articles, Short Communications, Case Reports and Letters to the Editor. Please follow the instructions relevant to type of manuscript being submitted.
Original Articles: Original Article reports original research, and is a novel research study. The standard layout is given below.

  1. Original Articles:Original Article reports original research, and is a novel research study. The standard layout is given below.
    Original Articles should be divided into the sections of Abstract, Key words, Introduction, Materials & Methods, Results, Discussion, Conclusion, References, Tables and Figure legends. There is no limit on the word count and number of figures/tables for an original article. For instructions on references, figures or tables, please refer to the following specific formats inthis Instruction to Authors.

AbstractAbstract is 350 words maximum and unreferenced, and must include the following subtitles: Background, Aims, Material & Methods, Results, and Conclusions. Do not use abbreviations and acronyms, and expand all abbreviations at first mention in the text.

Key words: Up to 10 key words or short phrases are provided following the Abstract. These should not duplicate key words from the title.

Introduction: Provide an adequate background and state objectives of the work, avoiding a detailed literature survey or a summary of the results.

Materials and Methods: (1) Provide the detailed information to allow the work to be reproduced. The previously reported methods should be indicated by a reference; (2) At beginning of the section, include the details of ethical clearance from local review board and informed consents from patients (if needed); and (3) Include “Statistical Study”  as a subtitle in the final part of the section, and specify the statistical methods used in the study. Avoid non-technical uses of technical terms in statistics, such as ‘random’ (which implies a randomizing device), ‘normal’, ‘significant’, ‘correlations’, and ‘sample’. Define statistical terms, abbreviations, and most symbols. Specify the computer software used. All P values should be reported as exact numbers to 2 digits past the decimal point, regardless of significance, unless they are lower than 0.01, in which case they should be presented to 3 digits. Express any P values lower than 0.001 as P<.001. P values can never equal 0 or 1. Use upper italics P.

Results: Present your results in a logical sequence in the text, tables and illustrations, giving the main or most important findings first. Do not repeat in the text all the data in the tables or illustrations; emphasize or summarize only important observations.

Discussion: Include summary of key findings, strengths and limitations of the study, interpretation and implications in the context of the totality of evidence, controversies raised by this study, and future research directions. Do not repeat in detail data or other material given in the Introduction or the Results section. Avoid claiming priority and alluding to work that has not been completed. New hypotheses may be stated if needed, however, they should be clearly labeled as such.

Conclusions: The conclusions of the manuscript may be presented in a short Conclusions section, or may stand alone or form a subsection of a Discussion section.

  1. Research Letters: ResearchLetters reports an important research results, but are preliminary of original research results (e.g. preliminary experiments limited by sample size or duration, or novel hypotheses). Journal of Dentistry, Medicine and Surgery  welcomes Research Letters of original research results. ResearchLetters published in the journal, like Original Articles, will be citable and searchable via Google Scholar and other database.

The word count of Research Letters should be within 2,000-3,000 (excluding the Abstract, references and figure legends). There is no limit on the number of  figures and tables. The Standard layout is given below.

Research Letter should have an Abstract with 350 words maximum, and must include the following subtitles: Background, Aims, Material & Methods, Results, and Conclusions. Do not use abbreviations and acronyms, and expand all abbreviations at first mention in the text. The text begins with Introduction as the first paragraph. A short description including methods, results and conclusions may be required. For instructions on references, figure or table, please refer to the following specific formats in this Instruction to Authors.

  1. Review Articles: Journal of Dentistry, Medicine and Surgery  welcomes Reviews of recent developments in medical sciences. The layout is given below.

An unstructured Abstract describing the methods used for literature researching, extracting, and synthesizing data should be included. The Introduction as first section should be included in the text, the subtitles of other sections would depend upon the topic reviewed.  A Review Article is normally 4,000–8,000 words (excluding Abstract and references), and illustrations are encouraged. For instructions on references, figures or tables, please refer to the following specific formats in this Instruction to Authors.

  1. Technical Articles: These articles should present new research or clinical methods, tests or procedures. The method may be completely new, or may offer an improved technique with supporting evidence of efficacy and safety, for an existing method, operations and management strategies. There is no strict limit on the word count and number of display items. For instructions on references, figure or table, please refer to the following specific formats inthis Instruction to Authors. The standard layout is given below.

Abstract:  Abstract (350 words maximum) should include subtitles: Background, Aims,  Methods, Results, Conclusions. Do not add reference in the Abstract.

KeywordsUp to 10 key words or short phrases are provided following the Abstract.

IntroductionThe Introduction section should be written clearly. Reports of clinical research should include a summary of a search of the literature to indicate why this study was necessary and what it aimed to contribute to the field. The section should end with a brief statement of what is being reported in the article.

MethodsProvide the detailed information to allow the work to be completed, and should include the setting, the type of participants or materials involved, and the type of analysis used. Authors can name it “Our For studies involving human participants, a statement of local ethical approval and consent should be included at top of the Methods section. If statistical test was used, a subsection on statistical analysis must be included in the final part of the Methods.

Results and Discussion: The Results and Discussion may be combined into a single section or presented separately. Present your results in a logical sequence in the text, tables and illustrations, giving the main or most important findings first. Do not repeat in the text all the data in the tables or illustrations; emphasize or summarize only important observations. Results of statistical analysis should include, where appropriate, relative and absolute risks or risk reductions, and confidence intervals. The Results and discussion sections may also include summary of key findings, strengths and limitations of the study, interpretation and implications in the context of the totality of evidence, controversies raised by this study, and future research directions. In the final part, author should state clearly the main conclusions of the technical study and give a clear explanation of their importance and relevance.

  1. Letters to Editor:Journal of Dentistry, Medicine and Surgery  welcomes all  topics that relates to medical sciences including clinical, scientific, educational or economic. Letters to the Editor published in the journal will have a volume/issue number, and will be citable and searchable via Google Scholar and other database. The article can have up to 1,000-2,000 words. There is no limit on the number of figures and tables. Letters to the Editor should have no abstract and no sub-headings. For instructions on references, figures or tables, please refer to the following specific formats in this Instruction to Authors.
  2. Case Report: Case Reports should have the following sections:

An abstract including titles Context, Case Report, and Conclusion, with 350 words maximum, do not use nonstandard abbreviations, footnotes or references.

Key words or short phrases (up to 10) are provided following the Abstract.

Introduction: Summarize the context for the report.

Case Presentation: Report the data of the patient(s) in a logical sequence in the text, tables, and illustrations. Do not duplicate data in graphs or tables.

Discussions: Emphasize the novel situation and add important insights into mechanisms or diagnosis or treatment, as well as, the conclusions that follow them.
The article can have up to 2,000 words.

  1. Expert Commentary: Commentaries are written on invitation of the Editors, and are short and narrowly focused on the articles published by the journal. They provide critical or alternative viewpoints on key issues and generally consist of a discussion of an article published in the journal. For instructions on references or figures, please refer to specific Formats inthisInstruction to Authors.
  2. Debates Articles: Journal of Dentistry, Medicine and Surgery  encourages submission of well-argued articles for debate on controversial issues of medical technique, practice or clinical science. The articles can report on all aspects of the subject including ethical aspects. The article can have up to 2,000 – 2,500 words. There is no strict limit on the number of figures and tables. For instructions on references, figure or table, please refer to the following specific formats inthisInstruction to Authors. The layout is given below:

Abstract: It should be structured with following subtitles: Background, Discussion, and Conclusion. The Abstract should not use abbreviations or references, 350 words maximum.

Key words: Up to 10 key words or short phrases are provided following the Abstract.

Background and Aims: The background section should be written from the standpoint of the authors in the area, must clearly state and/or illustrate the background to the discussion and its aims. This section should end with a very brief statement of what is being discussed in the article.

Discussion: This section may be broken into subsections with arguments.

Conclusion: This section should present in brief conclusion from the article.

Format of References

All references in the text must be numbered consecutively, place each citation immediately after the term or phrase and usually before the period; they should appear like the following: [1, 2, 5, 6] or [7-

When listing references, follow abbreviate names of journals according to the journal list in PubMed. Citations in the reference list should contain named authors up to 6; if more than 6, followed by “et al.” Some examples of the journal’s reference style are shown below. Please carefully follow the reference style precisely:

  • Journal Article: Deoke S , Gowardhan P. Sick Euthyroid Syndrome in Acute Myocardial Infarction and its correlation with Left Ventricular Function. National Journal of Medical and Allied Sciences 2014; 3(1):7-13.
  • Book Chapter: Ramphal R. Infections due to Pseudomonas species and related organisms. In: Fauci AS, Braunwald E, Kasper DL. Eds. Harrison Principles of Internal Medicine. 17th ed. New York, NY: McGraw Hill Medical; 2008:949-956.
  • Complete Book: Margulis L: Origin of Eukaryotic Cells. New Haven: Yale University Press; 1970.
  • Link/URL: U.S. positions on selected issues at the third negotiating session of the Framework Convention on Tobacco Control. Washington, D.C.: Committee on Government Reform, 2002. (Accessed March 4, 2002, at http://www.house.gov/reform/min/inves_tobacco/index_accord.htm).
  • Unpublished work accepted for publication but not yet released should be included in the reference list with the words “in press” in parentheses beside the name of the journal concerned. References must be verified by the author(s) against the original documents.

Personal communications or manuscripts either “in preparation” or “submitted for publication” are unacceptable as reference.

Format of Tables

  • Include a title for each table (no longer than 15 words) in a single file.
  • Tables should be self-explanatory and should not duplicate textual material.

     

  • Tables with more than 10 columns and 25 rows are not acceptable. 
  • Explain all nonstandard abbreviations in footnotes. 
  • For footnotes use the following symbols: *, †, ‡, §, ||,¶ , **, ††, ‡‡ 
  • Tables with their legends should be provided at the end of the text after the references. The tables along with their number should be cited at the relevant place in the text 
  • Submit tables in a word processing—not an imaging—format. 
  • Identify statistical measures of variations, such as SD or SE. Do not merely repeat information in the text. 
  • All P values should be reported as exact numbers to 2 digits past the decimal point, regardless of significance, unless they are lower than 0.01, in which case they should be presented to 3 digits. Express any P values lower than 0.001 as P<.001. P values can never equal 0 or 1. 
  • Obtain permission for all fully borrowed, adapted, and modified tables and provide a credit line in the footnote.

Format of Figures

  • Upload the images in JPEG format. The file size should be within 1024 kb in size while uploading. 
  • Number all figures in the order of their citation in the text. 
  • Include a title for each figure (no longer than 15 words). Titles and detailed explanations belong to the figure legends, not on the illustrations themselves. 
  • Multi-panel figures (for example Fig. 1a, 1b, 1c, 1d) should be submitted as a single composite file that contains all parts of the figure. 
  • Labels, numbers, and symbols should be clear and of uniform size. The lettering for figures should be large enough to be legible after reduction to fit the width of a printed column. 
  • Figure titles and legends should be provided in the main manuscript, not in the graphic file. 
  • The photographs and figures should be trimmed to remove all the unwanted areas.

Figure Legends

The legends should be included in the main manuscript text file immediately following the figures. For each figure, the following information should be provided:

  • All figures must have Arabic numbers corresponding to the illustrations (i.e., Fig. 1, 2, 3 etc.).
  • Short title of figure (maximum 15 words).
  • Supply a detailed explanation of each figure (maximum length, 40 words).
  • Define all symbols and arrows that are used to identify parts of the figures.
  • Explain internal scale and identify the method of staining in photomicrographs.

Please note: it is the responsibility of the author(s) to obtain permission from the copyright holder to reproduce figures that have previously been published elsewhere.

Submission of Manuscripts

All manuscripts must be submitted online through the website at http://www.jdms.in New users will have to register at this site. Registered authors can keep track of their articles after logging into the site using their user name and password. If you experience any problems, please contact the editorial office by e-mail at [email protected]

Prior to sending your electronic submission, please ensure that the manuscript has been prepared according to this Instruction, with special emphasis on the style of the manuscript and reference list. The submitted manuscripts that are not as per the “Instructions to Authors” would be returned to the authors for technical correction before they undergo peer-review.

To submit manuscript, authors should prepare manuscript in the form of two separate files:

Title Page and Cover Letter:

The type of manuscript (original article, case report, review article, Letter to editor, etc.);

Title should be concise and informative, do not use ” Effects of …” or ” Study of …”, fewer than 150 characters. Do not use abbreviations and formulae;

The names of all authors (with their affiliations) and name(s) of department(s) and/or institution(s) to which the work should be credited. All information which can reveal author’s identity should be here;

The total number of pages, total number of photographs and word counts (excluding the references, tables and abstract);

Acknowledgement, if any. One or more statements should specify 1) contributions that need acknowledging but do not justify authorship, such as general support by a departmental chair; 2) acknowledgments of technical help; and 3) acknowledgments of financial and material support, which should specify the nature of the support;

If the manuscript was presented as part at a meeting, the organization, place, and exact date on which it was read.

Registration number of a clinical trial and where it is registered (name of the registry and its URL)

The name, address, e-mail, and telephone number of the corresponding author, who is responsible for communicating with the other authors about revisions and final approval of the proofs.

Blinded Article File:
The manuscript must not contain any mention of the authors’ names or initials or the institution at which the study was done or acknowledgements. Page header can not include the authors’ names. The main text of the article, beginning from Abstract till References (including tables) should be in this file. Do not incorporate images in the file. The pages should be numbered consecutively, beginning with the first page of the blinded article file. The file should include main title of the article.

PREPARATION OF MANUSCRIPTS

Manuscripts must be prepared in accordance with “Instruction To Authors” of Journal of Dentistry, Medicine and Surgery. Before submitting a manuscript, authors are requested to check for the latest instructions of the journal.
All manuscript published in Journal of Dentistry, Medicine and Surgery must be written in English. To avoid unnecessary errors you are strongly advised to use the ‘spell-check’ and ‘grammar-check’ functions of your word processor.

ENGLISH-LANGUAGE EDITING SERVICES

To avoid unnecessary errors, you are strongly advised to use the services of a professional English-language editing company.

Please be aware that an author’s use of the services in no way guarantees that his or her submission will ultimately be accepted. Any costs incurred are the sole responsibility of the author.

Authorship Criteria

Authorship credit should be based only on substantial contributions to each of the three components mentioned below:

Concept and design of study or acquisition of data or analysis and interpretation of data;

Drafting the article or revising it critically for important intellectual content; and Final approval of the version to be published. Participation solely in the acquisition of funding or the collection of data does not justify authorship. General supervision of the research group is not sufficient for authorship. Each contributor should have participated sufficiently in the work to take public responsibility for appropriate portions of the content of the manuscript. The order of naming the contributors should be based on the relative contribution of the contributor towards the study and writing the manuscript. Once submitted the order cannot be changed without written consent of all the contributors.

Conflicts Of Interest

All authors must disclose any actual or potential conflicts of interest, including any financial, personal or other relationships with other people or organizations, with the study. Authors should also disclose conflict of interest with products that compete with those mentioned in their manuscript.

Permissions

Authors must submit written permission from the copyright owner (usually the publisher) to use direct quotations, tables, or illustrations that have appeared in copyrighted form elsewhere, along with complete details about the source. Any permission fees that might be required by the copyright owner are the responsibility of the authors requesting use of the borrowed material.

Patient Anonymity And Informed Consent

It is the author’s responsibility to ensure that a patient’s anonymity be carefully protected, and to verify that any experimental investigation with human subjects reported in the manuscript was performed with informed consent and following all the guidelines for experimental investigation with human subjects required by the institution(s) with which all the authors are affiliated. Authors should mask patients’ eyes and remove patients’ names from figures unless they obtain written consent from the patients and submit written consent with the manuscript.

SENDING REVISED MANUSCRIPT

The revised version of the manuscript should be submitted online in a manner similar to that used for submission of the manuscript for the first time. When submitting a revised manuscript, authors are requested to include, the ‘referees’ remarks along with point to point clarification. In addition, they are expected to mark the changes as highlighted text in the article.

PROOFS

The designated corresponding author will receive notification of availability of page proofs by e-mail. It is the author’s responsibility to ensure that there are no errors in the proofs. Proofs must be checked carefully and corrections sent back within 72 hours of receipt, as requested in the electronic cover letter accompanying the page proofs.

REPRINTS

The journal provides no free reprints, since all articles are now available as free PDF files on the website, from the day of publication of the issue, or sometimes even before.

OPEN ACCESS

All articles published in Journal of Dentistry, Medicine and Surgery are “open access”. This indicates that articles published online can be freely accessed at the journal’s website by all users. The journal automatically provides open access to the published articles while publications are online. 

(to be modified as applicable and one signed copy attached with the manuscript)

Manuscript Title: ___________________________________________________________

I/we certify that I/we have participated sufficiently in contributing to the intellectual content, concept and design of this work or the analysis and interpretation of the data (when applicable), as well as writing of the manuscript, to take public responsibility for it and have agreed to have my/our name listed as a contributor.

I/we believe that the manuscript represents valid work. Neither this manuscript nor one with substantially similar content under my/our authorship has been published or is being considered for publication elsewhere, except as described in the covering letter. I/we certify that all the data collected during the study is presented in this manuscript and no data from the study has been or will be published separately. I/we attest that, if requested by the editors, I/we will provide the data/information or will cooperate fully in obtaining and providing the data/information on which the manuscript is based, for examination by the editors or their assignees. Financial interests, direct or indirect, that exist or may be perceived to exist for individual contributors in connection with the content of this paper have been disclosed in the cover letter. Sources of outside support of the project are named in the covering letter.

I/We hereby transfer(s), assign(s), or otherwise convey(s) all copyright ownership, including any and all rights incidental thereto, exclusively to the Journal of Dentistry, Medicine and Surgery, in the event that such work is published by the Journal of Dentistry, Medicine and Surgery. The Journal shall own the work, including copyright;  the right to grant permission to republish the article in whole or in part, with or without fee;  the right to produce preprints or reprints and translate into languages other than English for sale or free distribution; and  the right to republish the work in a collection of articles in any other mechanical or electronic format.

We give the rights to the corresponding author to make necessary changes as per the request of the journal, do the rest of the correspondence on our behalf and he/she will act as the guarantor for the manuscript on our behalf.

All persons who have made substantial contributions to the work reported in the manuscript, but who are not contributors, are named in the Acknowledgment and have given me/us their written permission to be named. If I/we do not include an Acknowledgment that means I/we have not received substantial contributions from non-contributors and no contributor has been omitted.

Name Signature Date signed
1 ————— ————— —————
2 ————— ————— —————
3 ————— ————— —————
4 ————— ————— ————— (up to 4 contributors for case report/ images/ review)
5 ————— ————— —————
6 ————— ————— ————— (up to 6 contributors for original studies)